From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 17 Jan 2017 11:34:58 +0000 (+0000)
Subject: BCM270X_DT: Enable UART0 on CM3
X-Git-Tag: archive/raspbian/4.9.82-1+deb9u3+rpi1_jessie~5^2~360
X-Git-Url: https://dgit.raspbian.org/%22http://www.example.com/cgi/%22/%22http:/www.example.com/cgi/%22?a=commitdiff_plain;h=f4d739864511982e9c00f3bc207fcccc60111541;p=linux-4.9.git

BCM270X_DT: Enable UART0 on CM3

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---

diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
index 41874c25a842..3ba6e621856c 100644
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
@@ -6,6 +6,10 @@
 	model = "Raspberry Pi Compute Module 3";
 };
 
+&uart0 {
+	status = "okay";
+};
+
 &gpio {
 	sdhost_pins: sdhost_pins {
 		brcm,pins = <48 49 50 51 52 53>;